We drive ahead – right to the spot.
Our geared motors from SEW Eurodrive are simply the best with many advantages, that are too numerous to mention:
- selective speed reduction
- minimum space requirement
- multifarious and sturdy design
- considerable combination multiplicity, assisted by an optimum of additional designs
- low-noise running
- virtually maintenance-free operation
Spur gearboxes and gear motors
RX series
Output drive speeds: [rpm] 114 – 1829
Output torque: [Nm] up to 830
Motor power range: [kW] 0.09 – 45
R series – agitator versions also available
Output drive speeds: [rpm] 0.05 – 809
Output torque: [Nm] up to 18000
Motor power range: [kW] 0.09 – 160
Parallel shaft gearboxes and gear motors
Output drive speeds: [rpm] 0.1 – 752
Output torque: [Nm] up to 18000
Motor power range: [kW] 0.12 – 200
Bevel gearboxes and gear motors
Output drive speeds: [rpm] 0.1 – 522
Output torque: [Nm] up to 50000
Motor power range: [kW] 0.12 – 200
Worm gearboxes and gear motors
Output drive speeds: [rpm] 0.1 – 397
Output torque: [Nm] up to 4000
Motor power range: [kW] 0.12 – 2
SPIROPLAN® gear motors
Output drive speeds: [rpm] 8 – 329
Output torque: [Nm] up to 70
Motor power range: [kW] 0.12 – 1.1
MOVIMOT®
Supply voltage [V]:
3 x 380 – 500 ± 10 % 50/60 Hz
3 x 200 – 240 ± 10 % 50/60 Hz
Motor frequency: [Hz] 2 – 100
Control voltage: 24 VDC external, optional local supply
Interfaces: 3 binary inputs, 1 voltage-free alarm relay, serial interface RS 485, optional: PROFIBUS-DP, INTERBUS, CANopen, DeviceNet, AS-i
Adjustable: 2 fixed setpoints, 1 setpoint ramp, 15 addresses, braking mode, 4Q, PWM frequency
Protection class: IP 54, optionally IP 55 or IP 65
Ambient temperature: -25 °C to + 40 °C
VARIMOT® friction disc variable gear motors
D 16: [kW] 1.1 [max. adjustment range] 1:5
D 26: [kW] 2.2 [max. adjustment range] 1:5
D 26: [kW] 5.5 [max. adjustment range] 1:5
D 46: [kW] 11 [max. adjustment range] 1:4
MOVIDRIVE®
- Type MDF: for controlled three-phase motors with VFC flux control
– Type MDV: for speed-controlled three-phase motors (with speed feedback), switchable between VFC and CFC flux control.
– Type MDS: for synchronous servo drives with CFC flux control
MOVITRAC® 07
MOVITRAC® 07 – the first choice when maximum simplicity and speed are required. All main characteristics and functions for an uncomplicated and economical motor controller are combined in the MOVITRAC® 07. This makes it just as effective and reliable as its larger companions. But its biggest plus point is that it is simplicity itself to commission and operate.
